Petcock Rebuild Kit - These Petcocks Have a 3 Screw Rear Cover Plate.
Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring,
2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (3 Screw type).
Fits: TX650/A 1973-74, XS650B/C/D 1975-77
${displayCurrency('$ 17.95')}
Tap to Tank O-Ring
Product Id: 20-0015
Petcock Mount O-Ring - (Tap to Tank O-Ring)
Fits: Petcocks on 1970-77 650's
${displayCurrency('$ 2.95')}
Tap to Tank Mount Washers
Product Id: 20-0018
Sealing Washers for Tap to Tank Mount Screws.
Fits: Under Mount Screws on 1970-84 650's
${displayCurrency('$ 2.50')}
Petcock - Non Vacuum Type
Product Id: 20-0019
Petcock - Non Vacuum Type to Replace 1978-84 Vacuum Type Petcocks.
All 1978-84 North American market 650's have original petcocks operated by
Vacuum from a line to the intake (on carb holder). 1978-79 models have 2 and
1980-84 models have 1 petcock.
Vacuum petcocks are chronic leakers and are all getting to the point of being
non-repairable. Our petcock is the Early type 650 manual petcock with a wider
flange cast on it so it will fit in place of the vacuum types. Our Petcock fits
to right or left and each comes with the tap to tank O-Ring seal and assorted
outlet fittings (petcock has 2 outlet ports).
Fittings included: 2 ninety degree, 1 Straight fitting & 1 outlet port Plug.
There is an "ON", "OFF" and "Reserve" position.
${displayCurrency('$ 31.95')}
Tap to tank Mount Screws & Washers
Product Id: 20-0020
Tap to Tank Mount Screws (2) and Sealing Washers (2).
Fits: All 650's 1970-84
${displayCurrency('$ 2.95')}
Tap to Tank O-Ring for #20-0019
Product Id: 20-0021
O-Ring - Replacement Tap To Tank O-Ring for #20-0019 Manual Petcock.
${displayCurrency('$ 2.95')}
Petcock Rebuild kit
Product Id: 20-0049
Petcock Rebuild Kit - These Petcocks Have a 2 Screw Rear Cover Plate.
Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring,
2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (2 Screw).
Fits: XS1/XS1B/XS2 1970-72
${displayCurrency('$ 16.95')}
Petcock - Left Hand
Product Id: 20-0050
Petcock - Left Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover).
Includes: Tap to Tank O-Ring. Holes are 42.5mm Apart. OEM Ref.# 447-24500-02.
Replaces All Original Left Non-Vacuum Types used on 1970-77 XS650's.
This petcock will not fit 64-7702 gas tank.
${displayCurrency('$ 44.95')}
Petcock - Right Hand
Product Id: 20-0051
Petcock - Right Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover).
Includes: Tap to Tank O-Ring.
Replaces All Original Right Non-Vacuum Types used on 1970-77 650's
This petcock will not fit 64-7702 gas tank
Petcock Fuel Pipe Filter Set (2). These go over petcock fuel pipes up inside
gas tank.
Will fit our replacement petcocks for 1970-1977 stock petcocks (does not fit OEM).
${displayCurrency('$ 2.95')}
Petcock Outlet Fitting - 90 Degree
Product Id: 20-6420
Petcock 90 Degree Outlet Fitting - Replacement Fitting -
Fits: XS650 Petcocks - #20-0019/0050/0051 - Use as Required
(Not Original on 20-0050/20-0051 Petcocks).
${displayCurrency('$ 4.50')}
Email Me When Available
×Please provide your email below so we can contact you when this
product becomes available
You will receive a reminder when the product becomes available
Petcock Filter with Attached Filter Screen
Product Id: 20-6421
Petcock Filter with Attached Filter Screen.
Fits: Original Yamaha Manual Petcocks 1970-77 and (#20-0050/51) Only.
${displayCurrency('$ 5.95')}
Petcock Rebuild Kit
Product Id: 20-0100
Kit Contains O-Rings and Diaphragms to Rebuild One Fuel Petcock.
Does Not include plastic diaphragm spacer block.
Fits: Yamaha XS650 F, 2F, G, H, Special II, Heritage, 78-83.
XS400 E, F, 2F, G, H, 78-81, SG/SH Special 80-81
XJ700 N/NC/S Maxim 85-86
XS750 SE after frame 311211 78, XS750SF 79,
XS850 80-81
XJ900 83-85
XJ900R SECA 83
Dimensions: Diaphragm 36mm x 36mm. Bolt inside diaphragm 18.5mm long
${displayCurrency('$ 29.95')}
Petcock Rebuild Kit
Product Id: 20-0101
Petcock Rebuild Kit.
Kit Contains: O-rings and diaphragms to rebuild one fuel petcock. Does not
include plastic diaphragm spacer block.