$
FREE Continental USA & Canadian Fedex
Shipping on orders over $125.00!
Loading…
-
Universal Fit
- Accessories +
- Air & Fuel +
- Brakes +
- Carburetor +
- Clutch +
- Decals
- Drive +
- Electrical +
- Engine +
- Exhaust +
- Frame & Controls +
- Handlebars & Grips +
- Suspension +
- Tachometer & Speedometer +
- Tools +
- Wheels +
Bar Switch - Right Side
Product Id: 24-9054
Bar Switch Assembly - Brake/Throttle (RH) Side - Black
Replaces OEM Ref. #447-83963-00
Fits: TX650A 1974 and XS650B 1975 models (Dual Pull
Throttle Cable Models).
Note: Wires from this switch usually ran thru the
handlebars. Our replica has a U channel in the housing
that allows the wires to run outside of the bars (or
inside).
If the wires from the switch are to be run inside the bars
it will be necessary to remove the end terminal coupler
block and attach suitable end terminals to match your
harness.
${displayCurrency('$ 54.95')}
Email Me When Available
Clutch Cable Adjuster Dust Cover
Product Id: 08-0300
Clutch Cable Adjuster Dust Cover - Rubber boot/cover
keeps dirt from contaminating cable adjuster threads.
Replaces original OEM cover.
Fits: 78-84 XS650's and hundreds of other Yamaha's.
${displayCurrency('$ 4.95')}
Email Me When Available
Rocker Shaft Plugs - Set /4
Product Id: 05-0080
Stainless Steel Rocker Shaft Plug & O-Ring Set.
Set includes 4 Plugs and 4 O-Rings - Allen Socket Head Type.
Fits: All XS/TX 650's 1970-84
${displayCurrency('$ 19.95')}
Email Me When Available
Aluminum Rocker Shaft Plug (Set/4)
Product Id: 05-0081
Aluminum Rocker Shaft Plug & O-Ring Set.
Set includes 4 Plugs and 4 O-Rings. Allen Socket Head Type.
Fits: All XS/TX 650's 1970-84
${displayCurrency('$ 19.95')}
Ignition Switch
Product Id: 12-4035
Ignition Switch with Keys - OEM Ref. # 256-82508-30/31, 366-82508-30
${displayCurrency('$ 59.95')}
Extended Throttle Cable
Product Id: 51-9502
Extended Throttle Cable - (Black) Throttle - Same as Throttle Cable
#51-3502 but + 350mm. (13.75") in length.
Fits: Custom High bar applications for XS650's (1976-84).
Great for many custom applications for many bikes. Can be used with XS400.
Note: Soldering required and length difference between inner and outer
cables must be kept same as stock cables.
${displayCurrency('$ 23.95')}
Email Me When Available
Extended Throttle Cable
Product Id: 51-9510
Extended Throttle Cable - (Black) Throttle - Same as Throttle cable
#51-3510 (LH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm
(13.75") in length). Total outer cable casing length including throttle
end adjuster fitting is approx 56.75" (1441mm). Cut the outer cable to
the desired length, crimp on the casing ferule, trim the inner cable to
length and then solder on the carb end cable nipple (ferule and end nipple
included in pack).
${displayCurrency('$ 21.95')}
Extended Throttle Cable
Product Id: 51-9509
Extended Throttle Cable - (Black) Throttle - Same as Throttle cable
#51-3510 (RH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm.
(13.75") in length. Total outer cable casing length including throttle
end adjuster fitting is approx 56.75" (1441mm). Cut the outer cable to
the desired length, crimp on the casing ferule, trim the inner cable
to length and then solder on the carb end cable nipple (ferule and end
nipple included in pack).
${displayCurrency('$ 23.95')}
Extended Clutch Cable
Product Id: 51-9204
Extended Clutch Cable - (Black) Clutch - Same as Clutch cable
#51-3204 but + 350mm. (13.75") in length. Total outer cable
casing length including metal bend that fits to engine is approx
66.5" (1690mm).
Fits: Custom High Bar applications for TX/XS650's (1974-84). Great for many custom applications for many bikes.
Note: Soldering required and length difference between inner
and outer cables must be kept same as stock cables.
${displayCurrency('$ 23.95')}
Connecting Rod Bearing, Washer and Pin Kit
Product Id: 05-0003
HP Connecting Rod Bearing, Washer & Pin Kit. Includes: Big end Bearing & Thrust Washers. A Superior quality part made in Japan on all new tooling.
${displayCurrency('$ 77.95')}
Gas Cap Rubber Seal
Product Id: 20-0651
Rubber Seal for XS1 Cap Seal
${displayCurrency('$ 8.95')}
Electronic Speedometer - KPH
Product Id: 03-0672
Electronic Speedometer - KPH. Large 4" size. Chrome Cover matches original gauge. Electronic pickup. (0-220 KPH). Adjustable to wheel circumference sizes from 1400-2299, preset size is 1995mm. Includes 3 magnet head bolts to be installed in hub along with pickup which mounts on the bottom of fork leg.
${displayCurrency('$ 47.95')}
Electronic Speedometer - MPH
Product Id: 03-0669
Electronic Speedometer - MPH.
Large 4" size. Chrome Cover matches original gauge. Electronic pickup. (0-130 MPH )Adjustable to wheel circumference sizes from 1400-2299, preset size is 1995mm. Includes 3 magnet head bolts to be installed in hub along with pickup which mounts on the bottom of fork leg.
${displayCurrency('$ 47.95')}
Electronic Tachometer
Product Id: 03-0670
Electronic Tachometer
Chrome cover matches original tachometer appearance.
(0-10k RPM)
Wiring:
Short Green & Pink - Backlight
Long Green - Ground
Black - Power
Blue/Yellow - Pick up
Fits Yamaha 650's 80-83
${displayCurrency('$ 47.95')}
Email Me When Available
Cam Chain Rivet Link
Product Id: 01-8815
Tsubaki BF05M Cam Chain replacement link
${displayCurrency('$ 3.95')}
One of the largest vintage Yamaha XS650
parts warehouses in the world!
© 2024
XS650 DIRECT
All Rights Reserved.
