Chrome Mirror Set/2 with LED Arrow Lights Built into the Mirror Backs. Power leads just tap into the existing front signal lamp wiring connections in the headlamp shell and flash along with the standard signal lamps. No flasher relay changes needed. 10mm threaded bar mount style. Note: These mirrors have LH threads on brake side to fit Yamaha's.

Fork Tube Caps - Set/2 - Stock Chromed Steel OEM type Caps. OEM Ref# 256-23111-60-00 Fit: 34mm fork tubes on - XS1/XS1b/XS2 (1970-72) Caution! Fine thread, use care when installing.

Grab Rail - Polished Chrome, includes special rear fender mount bolts. Fits: 1976-79 XS650 "Standard" models. Note: Grab Rail bolts thru rear fender (into Grab rail) and top of rear shocks.

Shoulder Bolts - Replacement for Stock Rear Fender Mounting Bolts as used on 1974-79 "Standard" models. These Bolts pass thru the stock rear fender, the rear fender mount rubbers and into the grab rail mount. Bolts also are replacements for the bolts included with grab rail #68-6809.

Ultimate High Output Replacement Coil. Replaces stock factory Tci ignition coils.12 Volt. Primary resistance 2.45 OHMs. Secondary resistance 15ak OHMs 6.6mm mounting holes spaced at 102mm mounting holes center to centerWarning: Serious High Voltage Possible Output as high as 82 KvCaution! Do not operate or apply power to the ignition system with one or both spark plugs disconnected. Do not leave the ignition on with the engine not running. Warranty is void if operated with one or both spark plugs disconnected or if the ignition is left on with the engine not running.

Bolt Assembly (Special type) - Brake Shoe Backing Plate to Brake Stay. Fits: All 1974-84 XS/TX650's.

Chrome Plated Rear Brake Pedal Fits: All XS650's 75-84

Smith's Style Speedometer to fit stock mount bracket on 1970-72 XS1/XS2 650's. Vintage Style with Black case, 3.15" Diameter (80mm). Black Face 0-130 MPH with Tripmeter.AMBER. Mechanical cable drive type.(60MPH=2,240 RPM) Stud mount with Nylock Nuts and rubber damper grommets. Note: This instrument type has a straight out drive so will Not work on Later models as the drive would interfere with the stock headlamp shell.Calibrated for 19" front wheel. 2:1 ratio. Will work with most Japanese motorcycles.Yamaha, Suzuki, Kawasaki, Honda, you need to check ratio, wheel size, etc.

Polished Billet Aluminum Alternator Cover with XS Performance Logo CNC cut into cover face. Fits: 1970-84 650's

Rear Short Stalk Signal Lamp. For those wanting signal lamps tucked in closer to the frame. 8 mm stud mount.

Clutch Lever Dust Cover - OEM Ref. # 1E6-26372-00

Clutch Lever Dust Cover - OEM Ref. # 1E6-26372-00

Polished Chrome Aluminum Cam End Cover Set (2) - with XS Performance Logo. One cover for the advance side, one cover for the points side. CNC Machined - Polished Chrome finish (XS Performance Logo) with chrome allen set screws for mounting included. Fits: All 650's 1970-1984. Really adds to the looks of your engine!

Polished Chrome Aluminum Cam End Cover Set (2) - Plain, No logo. One cover for the advance side, one cover for the points side. CNC Machined - Polished Chrome finish (Plain, No logo) with chrome allen set screws for mounting included. Fits: All 650's 1970-1984. Really adds to the looks of your engine!

Big Fin Cylinder Block Fitted to Standard Size 650cc. Original type pistons. Includes Cylinder Block, fitted Stock type cast pistons, piston pins, clips, Head and base gasket and matching piston ring sets. Kit Fits: 1974-84 447 XS/TX 650 Engines. Start over at the original stock 650cc. bore size with the improved cooling and good looks of our Big Fin cylinder.