$
FREE Continental USA & Canadian Fedex
Shipping on orders over $125.00!
Loading…
-
Universal Fit
- Accessories +
- Air & Fuel +
- Brakes +
- Carburetor +
- Clutch +
- Decals
- Drive +
- Electrical +
- Engine +
- Exhaust +
- Frame & Controls +
- Handlebars & Grips +
- Suspension +
- Tachometer & Speedometer +
- Tools +
- Wheels +
Exhaust Valve
Product Id: 05-0067
XS Performance Polished Stainless Steel Exhaust Valve.
Replaces OEM #341-12121-01
Fits: All 650's 1970-84
Collets Sold Separate
${displayCurrency('$ 24.95')}
Intake Valve
Product Id: 05-0065
XS Performance Polished Stainless Steel Intake Valve.
Replaces OEM #341-12111-02.
Fits: All 650's 1970-84
Collets Sold Separate
${displayCurrency('$ 24.95')}
Front Fork Spring Set
Product Id: 27-1087
Performance Progressive wound Front Fork Spring Set.
Springs Improve handling while retaining OEM geometry. Stops front end
droop and diving during braking while improving cornering stability.
Progressive design combats bottoming in harsh conditions by increasing
resistance as spring compresses. 23mm Dia. x 495mm long.
Fits: 34mm stock forks on TX650A (1974) and XS650B/C (1975-76)
${displayCurrency('$ 74.95')}
Fork Tube Cap Set
Product Id: 27-4002
Fork Tube Caps - Set/2 - Stock Aluminum OEM type.
Replaces OEM # 341-23111-50/51
Caps Fit: 34mm. fork tubes on TX650A (1974) & XS650B/C (1975-76)
Note: Use Fork Cap Tool (17mm. Hex) #35-1081 to remove or install.
Caution! Fine thread, use care when installing.
${displayCurrency('$ 47.95')}
Fork Tube Cap Set
Product Id: 27-4003
Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster.
OEM Ref.# 1T3-23111-50-00
Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork
tubes Recommended type for 77-84 models using our 27-1088 progressive type fork
springs and/or our fork damper valves #27-1086.
Note: Use Fork Cap Tool (17mm Hex) #35-1081 to remove or install.
Caution! Fine thread, use care when installing.
${displayCurrency('$ 47.95')}
Fork Tube Cap Set
Product Id: 27-4004
Fork Tube Caps - Set/2 - Stock Aluminum type but with No preload adjuster.
Caps Fit: 35mm fork tubes on XS650's 1977-84. Replaces troublesome
adjustable US model Cap used on 1978-84 650's
Note: Adjustable caps were never used on 650's outside of North America.
22mm Hex top Caution! Fine thread, use care when installing.
${displayCurrency('$ 49.95')}
Email Me When Available
Replacement Headpipes (70-84)
Product Id: 07-0758
Stainless Steel XS Performance Headpipe Set - 1.75" (45mm.) OD x 1.65" (42mm.)
ID x 39" Long. When Mounted the ends of the headpipes are approx. 5" past the
back edge of the engine Clutch (RH) Cover. New Chromed OEM type Finned Headclamps
included!
Fits: All 650's 1970-84
Fits: to our #07-0041, 07-0015 or 07-0014 Mufflers.
For maximum bottom end power these headpipes should be used with Headpipe
Exhaust port Torque optimizers (Diodes).
${displayCurrency('$ 339.95')}
Email Me When Available
Exhaust Head Stud 10mm x 1.25 x 43mm.
Product Id: 49-0736
Exhaust Studs for Cylinder Head - 10mm. x M1.25 x 43mm. Long with Plated Finish.
${displayCurrency('$ 2.95')}
Tappet Cover Stud 8mm x 1.25 x 30mm
Product Id: 49-0737
Cylinder Head Stud for 4 Hole Tappet Cover - 8mm. x M1.25 x 30mm with Plated
Finish.
Fits Cylinder Head 4 hole Tappet covers on all 1972-84 650's.
${displayCurrency('$ 2.95')}
Tappet Cover Stud 6mm x 1.00 x 30mm
Product Id: 49-0738
Cylinder Head Stud for 3 Hole Tappet Cover - 6mm. x M1.0 x 30mm with Plated
Finish.
Fits Cylinder Head 3 hole Tappet covers on all 1970-84 650's.
${displayCurrency('$ 2.95')}
Master Cylinder Reservoir Cap & Diaphragm Kit
Product Id: 08-7000
Master Cylinder Reservoir Cap and Diaphragm Kit to Repair Original Master Cylinders.
Kit Made in Japan
Kit Contains: Reservoir Cap - OEM # 1J3-25852-01-00
Diaphragm Bushing - OEM # 1J3-25855-01-00
Diaphragm - OEM # 1J3-25854-01
Cap Screws (4) - OEM # 90151-05008-00
${displayCurrency('$ 59.95')}
Email Me When Available
Yellow Silicone Plug Wire Set
Product Id: 23-2906
XS Performance 7mm Silicone High Tension Spark Plug Wire Set (2pc 20.5")
Yellow Color with Copper Core.
${displayCurrency('$ 9.95')}
Email Me When Available
Tail Light - European Type
Product Id: 11-2365
Tail Light Lens with chrome steel backing plate assembly.Fits: XS1 (1970) and similar tail lights used on later European XS650's 1977-84. If you like the look it works and looks great with XS650's worldwide, not just European models.Note: Side reflectors on lens are orange in color as used in late production.Mounting bolts are 60mm. (2.36") center to center.96x126mm
${displayCurrency('$ 18.95')}
Email Me When Available
Hydraulic Banjo Bolt Brake Switch
Product Id: 29-7002
Hydraulic Banjo Bolt Type Brake Switch. 10mm. x M1.25 with 24" Lead.
Brake switch bolt can be fitted anywhere from the master cylinder to the
caliper and is actuated by hydraulic pressure.
Fits: All Hydraulic Brake systems on all 72-84 XS650's that use a single hose
type banjo bolt.
${displayCurrency('$ 16.95')}
Email Me When Available
Steel Brake Line - Upper
Product Id: 29-7004
Steel Brake Line - Solid Upper type with fittings.
Fits: 1973-1976
Uppermost line located behind headlight shell. OEM Ref.# 371-25883-00
${displayCurrency('$ 7.95')}
One of the largest vintage Yamaha XS650
parts warehouses in the world!
© 2024
XS650 DIRECT
All Rights Reserved.
