Speedometer - Chrome Mini - 1.9" (48mm.) Diameter, Black Face, 0-220KPH . LED internal illumination. Cable Driven - matches Electronic Tachometer #03-0675.Calibrated for 19" front wheel. 2:1 ratio.

High Performance Camshaft and matching performance Valve Spring Kit (Sold as a kit Only). Cam fits 1974-84 447/533 type engines only. Camshaft has removable 36 tooth drive sprocket and kit includes special valve stem seals, Valve Springs and clearance spring caps (No valve guide mods needed). Cams are machined from New Billets (Not a regrind or hard-weld). No core is required or accepted. New installed internal bushings included. Designed as a bolt in kit requiring timing to stock marks to install. See specifications and Dyno test sheet for more info. Dyno Test Sheet | Camshaft Specifications & Instructions

7" Halogen Lamp with 60/55 Watt H4 P43T Halogen Bulb and Parking Light. E-Mark certified for RH drive European Market use (can also be used in north America). Replaces stock sealed beam. Fits into stock retainer of 1974-84 XS/TX650 Headlamp. Note: XS1/XS1b/XS2/TX650 (1970-73) models must use #10-1156 "W" Clip Set and clip the lamp unit to the headlamp rim.

Locating Pin - Auto Advance to Camshaft, Contact Point Cam and Auto Advance Drive Disc Locating Pins. OEM Ref. # 93603-07073

Stock Type Magnetic Drain Plug. OEM Ref.# 256-15351-00. Fits: All 650's 1970-84 Note: Each engine has 2 drain plugs

Overhaul Gasket Set - Made in Italy by Athena (A European original equipment supplier to Yamaha, Honda, Kawasaki, Suzuki and all major Italian bike makers. Top Quality ISO-9000 approved. Premium Gasket Kit. Athena sets contain more pieces than any other brand. Contains: 18-0672 x 1, 18-0673 x 3, 18-0675 (1pr.),18-0852 x1, 18-0855 x 1, 18-0856 x1, 18-0857 x 1, 18-0858 x1, 18-0860 x1, 18-0862 x1, 18-0863 x2, 18-0864 x1, 18-0865 (1pr.), 18-0869 x1, Valve Stem Seals 01-0115 x 4, and (18-0851 Base Gasket Do not use gasket cement on this special Gasket). Fits: 1972-84 650's Note: Gasket Sets do NOT contain copper washers, engine oil seals, cylinder head sealing washers, tach drive or cam chain tensioner o-rings/gaskets. These are available separate.

Bolts for Rear Sprockets - Original type (6pc. Set). Fits: All 650 Rear sprockets 1970-84

Front Fork Damper Valves (Pr/2) Tuneable Valves are installed on top of the front fork dampening rods and below the fork springs. The adjustable Damper Valve make rod style fork dampers perform like modern cartridge style forks. Fits: 35mm. forks on 1978-84 XS650's. The Best suspension upgrade modification for the XS650 Note: Damper rod drilling required.

Brake Disc Bolts (Set of 6). Fits: Front Brake Discs on All 650's 1977-84 and All 1978-80 650's with Rear Disc Brakes. Oem Ref. # 90101-08307/08312/08477

Throttle Butterfly Shaft Screws (Pk/4). Fits: Stock Mikuni BS34/BS38 CV Carbs.

Tall Chrome Crown Nut Set (6pc. Used on Bottom of Crankcase). 8mm x 1.25 thread x 19mm tall (use 12mm wrench). Replaces OEM# 90176-08019.

Chrome Cylinder Guide Bar Nut (Pk/2) Fits: into Front/center of cylinder casting on All 650's 1970-84.

Chrome Cylinder Guide Bar Bolt (Pk/2). Bolt Passes thru cylinder guide bar nuts located at Front/center of cylinder casting and secures cam chain guide bar to cylinder casting (inside cam chain tunnel). Fits: All 650's 1970-84

Rear Axel with Nut - Replaces Axel (OEM #341-25181) & Axel Nut (OEM# 90171-18008). Fits: All XS/TX650's 1974-84

Front Axel with Nut - Replaces Axel (OEM# 341-25181) & Axel Nut (OEM# 90171-14006/020).