Choke Plunger Dust Seal - Fits: 1980-83 Yamaha XS650 BS34 CV Carburetor Choke Plunger

Choke Plunger Dust Seal - equivalent to OEM 306-14173-00-00: 1970-1979 XS650 BS38 CV Carb Choke Plunger. 1976-1977 XS360 1976-1977 XS500 1973-1974 TX750 1977 XS750 1981-1982 XJ550

38mm Carb Holder Set for stock Mikuni BS38CV carburetors. Same as used on 74-79 models. These are the type WITHOUT air barbs. Fits: All 1974-79 650's.OEM reference: 447-13555-01-00 LH, 447-13565-01-00 RH

Carb Rebuild Kit Kit Contains: 8 hole choke body Gasket, Float Bowl Gasket 256, Float Valve Assy. 2.0 with washer, Pilot Jet #27.5 VM22/210 type, #135 Small Round Main Jet N102/221, Pilot Air Mixture Screw with O-Ring and spring, Choke plunger and Washer for float bowl main jet access plug. Note: Slide Needle Not included but available separate. Made in Japan - 1 kit required per carb. Fits: XS650E/SE/F/SF/2F (1978-79) Note: Carb idle mixture screw O-Rings included may or may not fit correctly in your Mikuni BS38 CV stock carb. The O-Ring in the carb as originally supplied by Mikuni/Yamaha varies in fit and size and we have found it impossible to match or guarantee a proper fit. No alternatives can or will be supplied. The mixture screw and matching O-ring was never sold or supplied by Yamaha or Mikuni.

Lower Engine Case Screw Set. - 18pc. Fits: Lower right hand & left hand engine cases on all 650's.

Engine Top Fastener Set - 55pc. 55pc. Kit Contains: 3 Hole Tappet Cover chromed Crown Nuts (12pc.) with matching chrome Washers (12pc.) + Cylinder Head chrome Crown Nut (8pc.) + chrome rocker shaft End Plug (4pc.) + Point/Cam Cover chrome Screws (4pc.) + Exhaust Stud chrome Crown Nuts (4pc.) with matching Stainless Lock Washers (4pc.) + 2pc. Chrome Oil tube banjo bolts, + 2pc. Chromed Cylinder front/Cam chain guide bar Nuts, + 2pc. chromed cam chain guide bar bolts. Fits: 1970-71 650's

Cylinder Head Hardware Set Fits: 1972-84 XS/TX 650's

Polished Chrome Shock Crown Nut - Short Type. 17mm hex x 10mm 1.25pitch x 16mm Long. Fits: All Footrest mount bars 70-84 + Fender mount thru point on 76-78's.

Chrome Thick Washer - 10mm x 27mm x 4.5mm. Fits: All Footrest mount bars on 1970-84 650's and shock absorber top mount stud on 1974-79 650's.

Advance/Breaker Housing Screw & Washer Set (6pc. Set). Includes: 3 countersunk flat-head type screws and 3 matching starlock washers. 2 sets required to do both engine housings on each engine. Fits: All 650's 1970-84

Exhaust Stud Nuts & Locks - 8 Pc. Set Correct type Chrome Steel Crown Nuts and matching stainless steel lockwash.

Chrome Shock Crown Nut - Deep Type. 17mm hex x 10mm x 1.25 pitch x 21mm Long. Fits: Shock absorber upper studs on 74-84 650's.

Passenger Footpeg Mount Nut - Polished Chrome Crown Nut - 12mm (19 x 19). Special fine thread to fit passenger footrest mount studs on 1977-84 650's.

Passenger peg Mount Nut - Locking type Nut - 12mm. (19 x 11) Special fine thread to fit passenger footrest mount studs on 1977-84 650's.

Front Wheel Axel Nut 14mm x 1.25