Sidestand Shoulder Bolt with Castle Nut Fits: All 1970-76 XS/TX 650's.

6Pc. Sidestand Kit. Includes Sidestand, Return Spring, Sidestand Spring Link Plate, Sidestand Bolt, Washer & Locktab. Fits: All 1977-84 XS650's

Sidestand Spring - Fits: 1977-84 XS650's.

Sidestand Bolt, Washer & Locktab Fits: 1977-84 XS650 sidestand mount.

Sidestand Spring Link Plate Fits: 1977-84 XS650 sidestand mount

Center (Main) Stand. Also has fittings for Dual return springs as used on European Models. Replaces Stands on All North American 1974-84 XS650's

Center Stand Spring, Plated Finish. Fits: All 1970-84 XS650 Center Stands with single springs.

Clutch Friction Plate Fit: All 650's 1970-84 - Sold Each - Order number of pieces required. 1980-84 models - use 6pc. 1974-79 models - use 7pc.. 1970-73 model clutch friction plates are No longer available but these later types can replace the originals! (6 friction and 5 steel drive plates were originally used). To use these late type friction plates remove the old clutch plate separator O-Rings (discard), and add 1 additional steel drive plate and replace all 6 old type thick friction plates with 7pc. of this new type friction plate.

Clutch Spring Screw Set - 12pc. - 6 Socket Head Bolts with Matching Sleeves. Fits: 1970-84 Clutch Hub

Needle Bearing with Thrust Washer for Rear of Inner Clutch Hub. Fits: All 650's If your clutch does not seem to release properly or if you have difficulty finding neutral when the engine is hot a worn bearing may be the reason. Our high quality multi-needle bearing assembly is a superior replacement for the original. Note: Bearing Part #39-6505 (OEM Ref.#93341-23504) consists of - 1. the circular bearing race and 2. one thin matching washer. Parts books and manuals show this as 1 part only (not 2 pc). The Clutch must be assembled in Sequence shown above - Bearing with its matching thin washer and then the thick clutch washer (thrust plate).

High Performance Clutch Springs - Set of 6 - Replaces/upgrades sagged original stock springs.

Steel Clutch Drive Plate Fit: All 650's 1970-84 - Sold Each - Order number of pieces required. 1980-84 models - use 5pc. 1974-79 models - use 6 pc. 1970-73 (use 5pc. OR 6pc. if the clutch is upgraded to late type friction plates. See friction plate listings for conversion info). Oem Ref.# 341-16325-01

Clutch Pushrod Bearing, 2 used in each 76-84 engine, (only 1 pc. required if long early 70-75 type clutch pushrod is used). Fits: 1970-84 XS/TX650's.

Clutch Pushrod (Short Outer Rod). Stock part for 1976-84 650's

Clutch Pushrod (Long One-Piece Rod). Replaces both inner and outer pushrod and outer ball bearing used on 76-84's. Provides more stable action and allows less wear of clutch pushrod seal (Note photo not to scale). Fits: 1970-84 650's. Stock original type for 1970-75 models.