$
FREE Continental USA & Canadian Fedex Shipping on orders over $125.00!
Select "Make" and "Year" before "Model"
product image
Wire Harness
Product Id: 24-6580
Main Wiring Harness - OEM Ref.# 3GO-82590-50. Wire Harness Includes Built in Stock Type Fuse Panel Assembly. Fits: XS650G 1980 Special II - (TCi Electronic Ignition)
${displayCurrency('$ 74.95')}
product image
Wire Harness
Product Id: 24-6583
Main Wiring Harness - OEM Ref.# 5V4-82590-50-00. Wire Harness Includes Built in Stock Type Fuse Panel Assembly. Fits: XS650SJ/SK/SL 1982-84 - (TCi Electronic Ignition).
${displayCurrency('$ 74.95')}
product image
Alternator Brush Holder & Mount Screws
Product Id: 24-7079
Alternator Brush Holder & Mount Screws - We recommend this be replaced if yours is cracked, broken or oil or grease inpregnated. Fits: 1970-79 XS/TX650
${displayCurrency('$ 11.95')}
Email Me When Available
product image
Brush Holder Guard with Mount Screws
Product Id: 24-7084
Brush Holder Guard with Mount Screws (2). Fits: All 650's 1970-84
${displayCurrency('$ 4.50')}
product image
Alternator Brush Holder
Product Id: 24-8084
Alternator Brush Holder & Mount Screws - We recommend this be replaced if yours is cracked, broken or oil or grease inpregnated. Fits: All 1979-84 650's
${displayCurrency('$ 13.95')}
product image
Condenser
Product Id: 26-5114
Condenser Pack - One pack used per engine - (located under top motor mount) - Japan Made, OEM Quality, OEM # 256-81625-10. Fits: All 650's with point ignitions.
${displayCurrency('$ 21.95')}
product image
Fork Seals Set/2
Product Id: 27-1007
Fork Seal Set - 35 x 48 x 10.5/11 - Made In Japan by OEM supplier. For 35mm Fork Tubes
${displayCurrency('$ 12.95')}
product image
Fork Seals Set/2
Product Id: 27-1016
Fork Seal Set - 34 x 46 x 10.5 - Made In Japan by OEM Supplier. For 34mm Fork Tubes
${displayCurrency('$ 12.95')}
Email Me When Available
product image
Fork Seal Washers - Pack/2
Product Id: 27-1062
Fork Seal Washers Pk/2. Fit on top of Fork Seals and below the spring clips in the lower fork legs. For 35mm Forks
${displayCurrency('$ 8.95')}
product image
Fork Seal Retaining Clip - Pack/2
Product Id: 27-1063
Fork Seal Spring Clips (Pk/2) - These clips fit into the groove above the fork seals in the lower fork legs.
${displayCurrency('$ 5.50')}
product image
Fork Dust Covers - Pack/2
Product Id: 27-1065
Fork Seal Dust Covers (Pk/2) 35mm Fork Tubes
${displayCurrency('$ 21.95')}
product image
Fork Dust Covers - Pack/2
Product Id: 27-1066
Fork Seal Dust Covers (Pk/2) 34mm Fork Tubes
${displayCurrency('$ 25.95')}
product image
Swingarm Pivot Bolt Shaft
Product Id: 27-1067
Swingarm Pivot Bolt (Shaft) - Bolt with full size thread (replaces undercut original). Check your original for cracks at the threads.
${displayCurrency('$ 34.95')}
product image
Swing Arm Bolt Tube Bushing
Product Id: 27-1068
Bushing (Swingarm Bolt Tube). OEM Ref.# 341-22184-00. Tube is a slip fit through bronze bushings. Replace if original is galled or will not fit through new bronze bushings.
${displayCurrency('$ 39.95')}
product image
Fork Brace - Chrome - 35mm
Product Id: 27-1070
Fork Brace - Stiffens front end, improves handling. Precision Steel construction, Chrome plated finish. Fits over fender.
${displayCurrency('$ 79.95')}
One of the largest vintage Yamaha XS650
parts warehouses in the world!
© 2024
XS650 DIRECT
All Rights Reserved.