Bar Switch Assembly - Brake/Throttle (RH) Side - Black
OEM Ref. # 584-83963-00-00
Fits: 1976-78 North American Models and 1976-84 European models.
${displayCurrency('$ 54.95')}
Bar Switch - Clutch Side
Product Id: 24-2061
Bar Switch Assembly - Clutch (LH) Side - Chromed
OEM Ref. # 1T3-83973-00
Fits: 1977-84 North American Model XS650's.
Note: Switch has No choke cable lever mount as used on
some 1983-84 models.
${displayCurrency('$ 74.95')}
Bar Switch - Brake Side
Product Id: 24-2062
Bar Switch Assembly - Brake/Throttle (RH) Side - Chrome Plated
OEM Ref. # 584-83963-00-00
Fits: 1976-78 North American Models and 1976-84 European models.
${displayCurrency('$ 59.95')}
Bar Switch - Brake Side
Product Id: 24-2063
Bar Switch Assembly - Brake/Throttle (RH) Side - Chrome Plated
OEM Ref. # 2L0-83975-00-98
Fits: 1979-84 North American Model XS650's.
${displayCurrency('$ 59.95')}
Starter Motor Brush Set
Product Id: 24-2064
Starter Motor Brush Set (2pc) - Complete Set to Replace Worn out Original Brushes.
Fits: 1972-84 XS/TX650's
${displayCurrency('$ 13.95')}
Handlebar Switch Housing Screws - Brake Side
Product Id: 24-2066
Chrome Switch Housing Screws (Pk/2) for Brake (Throttle) Side Handlebar Switch.
Holds Switch Halves Together.
Fits: 1972-84 650's
NOTE: These are replacement screws normally included with switch #24-2062
& #24-2063
${displayCurrency('$ 1.95')}
Handlebar Switch Housing Screws - Clutch Side
Product Id: 24-2067
Chrome Switch Housing Screws (Pk/2) for Clutch Side Handlebar Switch.
Holds Switch Halves Together.
Fits: 1972-84 650's
NOTE: These are replacement screws normally included with switch #24-2062
& #24-2063
${displayCurrency('$ 1.95')}
Email Me When Available
×Please provide your email below so we can contact you when this
product becomes available
You will receive a reminder when the product becomes available
Rectifier Only
Product Id: 24-2085
Rectifier - Solid State Replacement for Original Separate Factory Unit.
Direct plug in to stock harness.
Fits: 1970-79 650's.
Note: wiring in connector plug must be rearranged as shown.
${displayCurrency('$ 69.95')}
Email Me When Available
×Please provide your email below so we can contact you when this
product becomes available
You will receive a reminder when the product becomes available
Rectifier/Regulator
Product Id: 24-2087
Solid State Rectifier/Regulator, Made in Japan by original supplier. Direct
plug in replacement for 1980-84. Not for use on earlier models.
Fits: 1980-84 XS650
${displayCurrency('$ 129.95')}
Email Me When Available
×Please provide your email below so we can contact you when this
product becomes available
You will receive a reminder when the product becomes available
Solid State Rectifier/Regulator
Product Id: 24-2089
Solid State Rectifier Regulator - Comes with Connector Block/Terminal
Kits to Wire in Direct to Original Wiring Harness.
Replaces Original individual units used on 1970-79 650's.
Note: This Rectifier/Regulator is sold only for use with stock 1970-79 wire harnesses.
If you are purchasing it for use on a chopper or custom, please note that we can't
accept returns for any reason due to the possibility of it being incorrectly installed.
Also note this rectifier/regulator does not mount in the original spot.
${displayCurrency('$ 119.95')}
Email Me When Available
×Please provide your email below so we can contact you when this
product becomes available
You will receive a reminder when the product becomes available
Alternator Rotor Nut & Washer Set
Product Id: 24-2647
Alternator Rotor Nut and Lock Washer Set.
${displayCurrency('$ 3.95')}
Alternator Brush Set/2
Product Id: 24-2650
Alternator Brush Set - Complete set as shown. Replace brushes if carbon brush
is 7mm (0.276") or less.
Fits: 1970-79 650's
Note: To install pull brush assembly around to opposite side of metal
bracket its soldered to and then insert into holder.
${displayCurrency('$ 17.95')}
Alternator Brush Set/2
Product Id: 24-2651
Alternator Brush Set - Complete set as shown. Replace brushes if carbon brush
is 7mm (0.276") or less.
Fits: 1980-84 XS650
Note: To install pull brush assembly around to opposite side of metal bracket
its soldered to and then insert into holder.
${displayCurrency('$ 17.95')}
Alternator Rotor
Product Id: 24-2652
New Alternator Rotor, (For TCI Ignition or Points Models).
Fits: 1975-81 XS/TX650's
${displayCurrency('$ 199.95')}
Email Me When Available
×Please provide your email below so we can contact you when this
product becomes available
You will receive a reminder when the product becomes available
Alternator Stator
Product Id: 24-2656
Alternator Stator for Factory Tci Ignition Type Models.
Fits: XS650 1980-84 North American models.
Only your original 80-84 TCi trigger needs to be installed.