$
FREE Continental USA & Canadian Fedex
Shipping on orders over $125.00!
Loading…
-
Universal Fit
- Accessories +
- Air & Fuel +
- Brakes +
- Carburetor +
- Clutch +
- Decals
- Drive +
- Electrical +
- Engine +
- Exhaust +
- Frame & Controls +
- Handlebars & Grips +
- Suspension +
- Tachometer & Speedometer +
- Tools +
- Wheels +
7" Halogen Lamp Kit
Product Id: 09-0072
7" Halogen Lamp with 60/55 Watt H4 P43T Halogen Bulb and Parking Light.
E-Mark certified for RH drive European Market use (can also be used in north
America). Replaces stock sealed beam.
Fits into stock retainer of 1974-84 XS/TX650 Headlamp.
Note: XS1/XS1b/XS2/TX650 (1970-73) models must use #10-1156 "W" Clip Set and
clip the lamp unit to the headlamp rim.
${displayCurrency('$ 46.95')}
Auto Advance Drive Pin
Product Id: 14-0653
Locating Pin - Auto Advance to Camshaft, Contact Point Cam and Auto Advance
Drive Disc Locating Pins. OEM Ref. # 93603-07073
${displayCurrency('$ 1.95')}
Starter Motor Cable Cap
Product Id: 24-6521
Replacement Rubber Cap for Starter Motor Power Cable Terminal.
Fits: All 650's 1972-84
${displayCurrency('$ 2.25')}
Email Me When Available
Auto Advance Retainer Nut
Product Id: 14-0654
Ignition auto advance Retainer Nut. Holds advance unit to Camshaft end.
Cogged Nut to replaced damaged original nut.
Fits: All 650's 1970-84
${displayCurrency('$ 9.95')}
Hydraulic Brake Switch - Front
Product Id: 29-7000
Original Type Front Hydraulic Brake Light Switch. OEM Ref. # 341-83980-30-00
${displayCurrency('$ 10.95')}
7" Halogen Lamp Kit - Left Hand Side Driver
Product Id: 09-0053
7" Halogen Headlamp Conversion unit for Left Hand side of the road driving as in
the UK, Japan etc. Lamp unit is Euro E-mark approved and has an internal
parking lamp bulb. Lamp unit includes a 12V 60/55 Watt P43T Halogen Bulb with
dust boot.
7" Lamp unit fits into stock 1974-84 TX/XS Lamp retainer.
Note: XS1/XS1b/XS2/TX650 (1970-73) models must use #10-1156 "W" Clip Set and
clip the lamp unit to the headlamp rim.
${displayCurrency('$ 44.95')}
Yellow Silicone Plug Wire Set
Product Id: 23-2906
XS Performance 7mm Silicone High Tension Spark Plug Wire Set (2pc 20.5")
Yellow Color with Copper Core.
${displayCurrency('$ 9.95')}
Email Me When Available
Tail Light - European Type
Product Id: 11-2365
Tail Light Lens with chrome steel backing plate assembly.Fits: XS1 (1970) and similar tail lights used on later European XS650's 1977-84. If you like the look it works and looks great with XS650's worldwide, not just European models.Note: Side reflectors on lens are orange in color as used in late production.Mounting bolts are 60mm. (2.36") center to center.96x126mm
${displayCurrency('$ 18.95')}
Email Me When Available
Hydraulic Banjo Bolt Brake Switch
Product Id: 29-7002
Hydraulic Banjo Bolt Type Brake Switch. 10mm. x M1.25 with 24" Lead.
Brake switch bolt can be fitted anywhere from the master cylinder to the
caliper and is actuated by hydraulic pressure.
Fits: All Hydraulic Brake systems on all 72-84 XS650's that use a single hose
type banjo bolt.
${displayCurrency('$ 16.95')}
Email Me When Available
Starter Gear Retention Hardware Kit
Product Id: 24-6591
Hardware Kit - 4 pc. Kit of Parts that Hold the Starter Gear in Place.
Kit Contains: Circlip - OEM Ref.# 93410-17008, Holder Clip (Cupped Washer)
OEM Ref.# 306-15563-00, 2pc. Clip - OEM Ref.# 306-15562-00.
${displayCurrency('$ 8.50')}
Tail Light Base Rubber
Product Id: 02-6542
Replacement Gasket (Rubber) for base of XS #11-2303 Tail light with round type lens as used on most 71-79 XS/TX 650's.
${displayCurrency('$ 5.95')}
Email Me When Available
High Output Ignition Coil - Dual
Product Id: 17-6810
Dual Tower XS Performance High Output Ignition Coil 3.3 OHM
Primary Resistance. 15K OHM Secondary Resistance. Capable of
sustained 45KV output with 12.5v DC input. Capable of sustained
75KV output with 14v DC input. Replaces stock factory Tci
ignition coils on All 1980 & up models and works with Pamco
ignitions (Non rephased engine types). Requires 7mm Dia. High
tension spark plug wires (order separate) and 5K OHM spark
plug caps.
Warning: Serious High Voltage
Click here to see Coil Test Data
WARNING!!! Do not operate or apply power to the ignition system with one
or both spark plugs disconnected. Operating or applying power to the coil or
ignition system with one or both spark plugs disconnected will cause IMMEDIATE
FAILURE to the coil. Ignition coils are NOT WARRANTIED for this reason.
${displayCurrency('$ 89.95')}
High Output Ignition Coil - 3 OHM
Product Id: 17-6807
Single Tower XS Performance High Output Ignition Coil 3.3 OHM
Primary Resistance, 15K OHM Secondary Resistance. Capable of
sustained 45KV output with 12.5v DC input. Capable of sustained
75KV output with 14v DC input. Replaces stock contact point
ignition coils on All 1970 & up models and works with Pamco 270/
277 engine rephase ignitions. Requires 7mm Dia. High tension
spark plug wires (order separate) and 5K OHM spark plug cap.
Warning: Serious High Voltage
${displayCurrency('$ 69.95')}
Ignition Switch
Product Id: 12-4036
Ignition Switch with keys - Fits: XS650 1976-77 May adapt to other years.OEM Ref. #584-82508 (No fork lock on this type)Note: Yamaha has made various versions of this switch and all are sold under the same OEM part number. Ours does Not have a connector plug but wire leads with terminals. You may have to fit this switch to match your bikes harness connections in the headlamp shell. Position 1. Red wire in headlamp shell from main harness (+power feed from battery) goes to red Ignition switch wire.Key Position 2. Power is fed out via 2 brown wires & 1 red wire with yellow tracer.Key Position 3. Power is fed out via 2 blue wires (park position-only tail light is on).This fits onto the XS400. The wiring is not the same, you must match up and modify the wiring. Same for 1979 Daytona.
${displayCurrency('$ 29.95')}
Email Me When Available
Ignition Switch - European Models
Product Id: 12-4037
Ignition Switch with Keys - No Fork Lock on this Type - OEM Ref. #1U3/1U8-82508-81.
Fits: XS650 1976-84 (European Models)
Note: Yamaha has made various versions of this switch and all are
sold under the same OEM part number. Ours does Not have a connector
plug but wire leads with terminals (extra opposing terminals included
with switch). You may have to fit this switch to match your bikes
harness connection in the headlamp shell.
Position 1. Red wire in headlamp shell from main harness (+ power feed
from battery) goes to red Ignition switch wire.
Key Position 2. Power is fed out via 2 brown wires & 1 red wire with
yellow tracer.
Key Position 3. Power is fed out via red wire with yellow tracer only
(park position - only tail light is on).
${displayCurrency('$ 29.95')}
One of the largest vintage Yamaha XS650
parts warehouses in the world!
© 2024
XS650 DIRECT
All Rights Reserved.
