Alternator Rotor Nut and Lock Washer Set.

Alternator Brush Set - Complete set as shown. Replace brushes if carbon brush is 7mm (0.276") or less. Fits: 1970-79 650's Note: To install pull brush assembly around to opposite side of metal bracket its soldered to and then insert into holder.

Alternator Brush Set - Complete set as shown. Replace brushes if carbon brush is 7mm (0.276") or less. Fits: 1980-84 XS650 Note: To install pull brush assembly around to opposite side of metal bracket its soldered to and then insert into holder.

New Alternator Rotor, (For TCI Ignition or Points Models). Fits: 1975-81 XS/TX650's

Alternator Stator Assembly for Factory Tci Ignition Type Models. Complete New assembly includes New Stator Housing, Stator assembly with wire harness, New Brushes set (24-2651) and Brush holder Guard (24-7084). You can use your existing Alternator Brush Holder, set does not include it. Fits: XS650 1980-84 North American models. Only your original 80-84 TCi trigger needs to be installed.

Alternator Stator Assembly for contact Points Type Models. Fits: 1970-79 North American models (1970-84 Euro points models). Note: No core required or accepted. Ready to install & run!

Battery Positive (+) Cable - Approximately 6.5" Long. Fits: XS2 (1972), TX650 (1973).

Cable - Battery Relay to Starter Motor. Fits: XS2/TX650 (1972-73)

Battery Negative (-) Cable to Engine Block. Approximately 17" Long. Fits: XS2 (1972), TX650 (1973)

Battery Positive (+) Cable - Approximately 7" Long. Fits: 650's (1974-84)

Battery Negative (-) Cable - Frame to Negative Battery Terminal. Approximately 6.5" Long. Fits: 650's (1974-84)

Cable - Battery Relay to Starter Motor - Approximately 21" Long. Fits: 650's (1974-84)

Starter Block-Off Kit - Kit is used to block off starter motor hole when starter is removed and bike is to be started with kick starter only. Fits: 1972-84 650's

Starter Gear Repair Kit - If your starter kicks out when engaged or makes a rattling sound & will not engage, it is usually the gear that engages with the one on the crank has worn its teeth out (problem is actually not in the starter motor but in the drive train system to the crankshaft, like an Auto bendix drive). This repair kit is the solution! Kit contains: 1pc. 447-15516-00 Gear 4 (Starter gear), 1pc. 90468-29062 Clip - (Spring clip for starter gear), 1pc 90501-15409 Spring, compression - (starter gear spring). This gear assembly is located behind the leading edge of the clutch hub and is easy to change (Clutch cover & clutch hub assembly removal necessary). Fits: All 650's 1972-84

Horn Button with Spring Fits: XS/TX650 switches 1974-84.