Cam Chain Rivet Link Tsubaki BF05T Cam Chain. Made in Japan

Cam Chain Rivet Link Rivet Link - D.I.D. 219FTss. Fits: # 52-4008 Cam chain. Made in Japan NOTE: May not fit old original chains due to later chain dimension and design improvements made to strengthen cam chain.

Camshaft Seals - Pack of 2 (LH/RH) Seals have a running pattern and must be installed as Left Hand/Right Hand Sides, cannot be interchanged. Viton. OEM Ref# 93101-25044 Made in Japan (25-40-7)

Cam Chain Tensioner Pivot Arm Assembly OEM# Ref. 447-12220-00

Guide Stopper (Front cam chain guide bar) Fits: All TX/XS 650's 1970-84 - OEM Ref.# 256-12231-01 When black plastic bits start showing up in your oil its usually from the guide bar breaking up due to heat & old age. Repace it as the cam chain will next start to saw its way thru the aluminum support.

Camshaft Bearing - B16005 (Special C4 Clearance). 4 used per engine. Fits: All XS/TX650's 1970-84. Made in Japan by original supplier.

Camshaft Internal Metal Bush for Advance Rod. 2 Used per camshaft on 1970-79 models (Points Ignitions). Fits inside cam in center (one each side). Note: These are usually missing from 1980-84's.

Camshaft Internal Metal Labrinth Seal (Bushing) for Advance Rod. 2 used per camshaft on 1970-79 models (Points ignitions). Fits inside of camshaft and flush with ends (one each side). Note: These are usually missing from 1980-84's. Interchangeable with part #05-0034. OEM Ref.# 256-11155-00.

Camshaft Internal Cam Needle Bearing - (Upgrade/replacement for #05-0033). Mounts flush with cam ends. Fits: All 650's 1970-84

Cam Sprocket - 36 Tooth Replacement Sprocket for our 447 Type XS Performance Cam. Note: This sprocket does Not fit any other camshaft.

Replacement Spring for Cam Chain Tensioner on 1974-84 650's OEM Ref. # 90501-14095/341-12216-02

Cam Chain Tensioner Rod to Spring Damper. OEM Ref.# 2H0-12232-00. Original part on XS650H/SH/SJ/SK (1981-84) and will replace OEM # 341-12232-02 as used on (1974-80) models.

Endless One Piece Cam Chain - Daido 219FTss x 106 - Pitch .3061" (7.774mm). Fits: (36 tooth cam) The latest high strength cam chain from D.I.D. for late XS650's. High Quality Made in Japan. Note: As this is an endless chain you need to buy link #01-8802 if you plan on breaking the chain to install. Installation Note: Cam Chain IS absolutely correct original brand/size/length/type Original install will be Very tight as chain is pressure injected with grease at factory and head gasket is not yet compressed. Install with tensioner assembly out and it may be necessary to pry chain over last half tooth of cam sprocket to get the chain in place so joiner link can be installed. Chain will loosen once head is torqued and engine is run a short time.

Cam Chain - Tsubaki BF05T x 102 with Rivet Link. Pitch .315" (8.0mm). Made in Japan. Fits: XS1/XS1B/XS2/TX650 1970-73 (34 tooth cam). NOTE: Link pitch differs from chains used on later 650's. For 70-73 650's Only! Installation Note: Cam Chain IS absolutely correct original brand/size/length/type Original install will be Very tight as chain is pressure injected with grease at factory and head gasket is not yet compressed. Install with tensioner assembly out and it may be necessary to pry chain over last half tooth of cam sprocket to get the chain in place so joiner link can be installed. Chain will loosen once head is torqued and engine is run a short time.

High Performance Camshaft and matching performance Valve Spring Kit (Sold as a kit Only). Cam fits 1974-84 447/533 type engines only. Camshaft has removable 36 tooth drive sprocket and kit includes special valve stem seals, Valve Springs and clearance spring caps (No valve guide mods needed). Cams are machined from New Billets (Not a regrind or hard-weld). No core is required or accepted. New installed internal bushings included. Designed as a bolt in kit requiring timing to stock marks to install. See specifications and Dyno test sheet for more info. Dyno Test Sheet | Camshaft Specifications & Instructions