$
FREE Continental USA & Canadian Fedex Shipping on orders over $125.00!
Select "Make" and "Year" before "Model"
product image
Valve Stem Seal
Product Id: 01-0114
Valve Stem Seal (Sold each) Made in Japan - OEM Ref.# 341-12119-00/02
${displayCurrency('$ 4.95')}
product image
Cylinder Head Sealing Washer
Product Id: 01-0650
Cylinder Head Sealing Washer Steel Head washers with internal seal. Used under 4 outer cylinder head crown nuts. Note: Not included in gasket sets. Made In Japan. Sold each. OEM Ref.# 90210-10004
${displayCurrency('$ 4.50')}
product image
Brass Cylinder Head Washer
Product Id: 01-0651
Brass Cylinder Head Washer Can be used as a substitute for stock cylinder head sealing washers (#01-0650). Used on four outer cylinder head studs. 22mm. OD x 10.5mm. ID x 4mm. thick Note: All Cylinder head fasteners should be re torqued on newly assembled engines after they have been run at full normal operating temperature.
${displayCurrency('$ 3.50')}
product image
Exhaust Valve Guide
Product Id: 01-9088
Valve Guide - Exhaust - Standard Size
${displayCurrency('$ 24.95')}
product image
Valve Collets (Keepers)
Product Id: 01-9093
Valve Collets (Keepers) for Intake or Exhaust Valve - OEM # 341-12118-00 Sold in Pack of Two.
${displayCurrency('$ 5.95')}
product image
Valve Spring Seat Shim
Product Id: 05-0028
Shim for Valve Spring Seat - Original part used on cylinder head under the valve spring. Steel shim must be in place on head (often missing!) 1pc. fits below each valve spring assembly.
${displayCurrency('$ 5.95')}
product image
Valve Spring Set
Product Id: 05-0029
Performance Valve Spring Set (8 pc) with steel caps (4 pc). Special Valve caps provide maximum Cap to stem seal clearance. For use with the XS Performance #05-0025 Cam or Web cams or to replace original stock spring & cap sets. Fits: XS/TX650's 1970-84
${displayCurrency('$ 114.95')}
Email Me When Available
product image
Tappet Cover O-Ring
Product Id: 18-0671
Tappet Cover O-Ring - Made in Japan by original supplier (Ars). Sold Each. Fibre gaskets can be used on all 650's, these O-Rings can be used only on engines with the O-ring groove in the tappet cover cap.
${displayCurrency('$ 4.25')}
product image
Decompressor Cable - Grey
Product Id: 51-6504
Decompressor Cable (Grey) - OEM # 306-26371-00-00 - Made in Japan. Fits: XS2 (1972), TX650 (1973)
${displayCurrency('$ 16.95')}
product image
Exhaust Valve
Product Id: 05-0067
XS Performance Polished Stainless Steel Exhaust Valve. Replaces OEM #341-12121-01 Fits: All 650's 1970-84 Collets Sold Separate
${displayCurrency('$ 24.95')}
product image
Intake Valve
Product Id: 05-0065
XS Performance Polished Stainless Steel Intake Valve. Replaces OEM #341-12111-02. Fits: All 650's 1970-84 Collets Sold Separate
${displayCurrency('$ 24.95')}
product image
Valve Adjuster Screw
Product Id: 01-9096
Valve Adjuster Screw. Tappet Adjuster Screw Hex Socket type for easier valve clearance adjustments or to replace originals with damaged or worn hard facing (this causes inaccurate clearance settings). 32mm long, OEM Reference #90149-08098-00. 4 Used Per Engine
${displayCurrency('$ 7.95')}
product image
Rocker Arm Set
Product Id: 05-0037
XS Performance Rocker Arm Set (4) (3mm Internal Hex Type for Easy Valve Clearance Adjustments). Each assembly weighs only 5 oz. Fits: All 1970-84 650's. Note: Rocker Arms do Not have the decompressor lip as used on 1972- 73 Models. Sold in Sets of 4 Only.
${displayCurrency('$ 114.95')}
Email Me When Available
product image
Rocker Shaft Plugs - Set /4
Product Id: 05-0080
Stainless Steel Rocker Shaft Plug & O-Ring Set. Set includes 4 Plugs and 4 O-Rings - Allen Socket Head Type. Fits: All XS/TX 650's 1970-84
${displayCurrency('$ 19.95')}
Email Me When Available
product image
Aluminum Rocker Shaft Plug (Set/4)
Product Id: 05-0081
Aluminum Rocker Shaft Plug & O-Ring Set. Set includes 4 Plugs and 4 O-Rings. Allen Socket Head Type. Fits: All XS/TX 650's 1970-84
${displayCurrency('$ 19.95')}
One of the largest vintage Yamaha XS650
parts warehouses in the world!
© 2024
XS650 DIRECT
All Rights Reserved.