Brake Caliper Speed Bleed Screw - Built in check valve allows Easier brake bleeding.
Fits: 1977-84 650's Front or Rear.
${displayCurrency('$ 6.95')}
Email Me When Available
×Please provide your email below so we can contact you when this
product becomes available
You will receive a reminder when the product becomes available
Brake Caliper Piston
Product Id: 29-0516
Brake Caliper Piston, Replace if pitted or scored or air will seep into the brake system.
Fits Front or Rear
Length = 41.3mm, Diameter = 38mm.
${displayCurrency('$ 32.95')}
Brake Caliper Piston
Product Id: 29-0518
Brake caliper Piston, Two pistons are used in these early calipers. Caliper pistons
should be replaced if pitted or scored or air will seep into the brake system.
Fits: Front caliper on XS2/TX650/TX650A/XS650B/C (1972-76).
${displayCurrency('$ 21.95')}
Brake Caliper Mount Bolts - Pack/2
Product Id: 29-0519
Front Brake Caliper Mount Bolts (Pk/2) for one caliper. Chrome Plated and each with
flat and lock washers.
Fits: 1977-84 XS650 Front Calipers.
Brake Hose - Lower - Stock rubber type with protective spring. DOT Approved
Fits: XS2 (1972), TX650 (1973)
${displayCurrency('$ 28.95')}
Brake Hose - Upper
Product Id: 29-6517
Brake Hose - Upper - Stock rubber type with protective spring. DOT Approved
Fits: XS2 (1972), TX650 (1973)
${displayCurrency('$ 28.95')}
Brake Hose - Lower
Product Id: 29-6518
Brake Hose - Lower - TX650A (1974), XS650B/C (1975-76)
Stock rubber type with protective spring. DOT Approved
${displayCurrency('$ 29.95')}
Brake Hose - Upper
Product Id: 29-6519
Brake Hose - Upper - Stock rubber type with protective spring. DOT Approved
Fits: TX650A (1974), XS650B/C (1975-76)
${displayCurrency('$ 29.95')}
Brake Hose - Upper Front
Product Id: 29-6520
Brake Hose - Upper Front. Original rubber type with protective spring.
Made in Japan, D.O.T. Approved
Length 20" with 20 degree fittings.
Fits: 1978-84 XS650 "Specials" and 1977 standards with non stock high bars
${displayCurrency('$ 33.95')}
Brake Hose - Upper Front
Product Id: 29-6521
Brake Hose - Upper Front. Original rubber type with protective spring.
Made in Japan, D.O.T Approved
Length 17.5" with 20 degree ends
Fits: 1977 Standard models and 1978-84 Specials (With non-stock lower bars).