Fork Tube Cap O-Rings (Pk/2) for 34mm Forks

Fork Tube Cap O-Ring (Pk/2) for 35mm Forks

Front Fork Damper Valves (Pr/2) Tuneable Valves are installed on top of the front fork dampening rods and below the fork springs. The adjustable Damper Valve make rod style fork dampers perform like modern cartridge style forks. Fits: 35mm. forks on 1978-84 XS650's. The Best suspension upgrade modification for the XS650 Note: Damper rod drilling required.

Fork Tubes Set/2 - Replace those worn or damaged stock fork tubes with our new fork tubes and restore your front end to proper appearance and function. Replaces OEM #'s: 2F0-23110-00, 1T3-23124-50, 1G3-23124-50. Standard Length 35mm. Fork Tubes fit All 1977-84 650's.

Extended Fork Tube Set/2 (+ 2" over stock length). 35mm. OD Fork Tubes to fit All 1977-84 650's.

Extended Fork Tube Set/2 (+ 4" over stock length). 35mm. OD Fork Tubes to fit All 1977-84 650's .

Performance Progressive wound Front Fork Spring Set. Springs Improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. Progressive design combats bottoming in harsh conditions by increasing resistance as spring compresses. 23mm Dia. x 495mm long. Fits: 34mm stock forks on TX650A (1974) and XS650B/C (1975-76)

Fork Tube Caps - Set/2 - Stock Aluminum OEM type. Replaces OEM # 341-23111-50/51 Caps Fit: 34mm. fork tubes on TX650A (1974) & XS650B/C (1975-76) Note: Use Fork Cap Tool (17mm. Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing.

Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster. OEM Ref.# 1T3-23111-50-00 Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork tubes Recommended type for 77-84 models using our 27-1088 progressive type fork springs and/or our fork damper valves #27-1086. Note: Use Fork Cap Tool (17mm Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing.

Fork Tube Caps - Set/2 - Stock Aluminum type but with No preload adjuster. Caps Fit: 35mm fork tubes on XS650's 1977-84. Replaces troublesome adjustable US model Cap used on 1978-84 650's Note: Adjustable caps were never used on 650's outside of North America. 22mm Hex top Caution! Fine thread, use care when installing.

Extended Fork Tube Set/2 (+ 6" over stock length). 35mm OD Fork Tubes to fit All 1977-84 650's.

Fork Tube Caps - Set/2 - Stock Chromed Steel OEM type Caps. OEM Ref# 256-23111-60-00 Fit: 34mm fork tubes on - XS1/XS1b/XS2 (1970-72) Caution! Fine thread, use care when installing.