Fork Seal Dust Covers (Pk/2) 35mm Fork Tubes

Fork Seal Dust Covers (Pk/2) 34mm Fork Tubes

Swingarm Pivot Bolt (Shaft) - Bolt with full size thread (replaces undercut original). Check your original for cracks at the threads.

Bushing (Swingarm Bolt Tube). OEM Ref.# 341-22184-00. Tube is a slip fit through bronze bushings. Replace if original is galled or will not fit through new bronze bushings.

Fork Brace - Stiffens front end, improves handling. Precision Steel construction, Chrome plated finish. Fits over fender.

Swingarm Pivot Bolt (Shaft) - Bolt with full size thread (replaces undercut original). Check your original for cracks at the threads.

Performance Progressive wound Front Fork Spring set 2 pc- Fits:XS650 1977-84 with stock 35mm. forks. Springs Improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. Progressive design combats bottoming in hard conditions by increasing resistance as spring compresses. 24mm Dia. x 525 mm long. for some models you have to take out the spacer. These springs dont fit some US models with adjustable fork plug ( similar like #27-4004 )

Fork Gaitors (Set/2) 1972-84 models. (Remove stock dust covers). Give your 650 that "British" look. Provides great fork protection. 1970 models had a lip piece on the lower triple tree on which to clamp the boot, for later models simply insert a piece of split rubber rad hose inside and clamp the upper part of the boot to the fork tube. We suggest a breathing hole be punched on a lower pleat also (face to rear) to allow venting of air.

Cap (Fork Tube Top Cap/Rubber Plug) - Pk/2

Cap (Fork Tube Top Cap/Rubber Plug) - Pk/2 -

Fork Tube Set (2) - Replace those Worn/Damaged Fork tubes with our New Tubes & restore your front end to proper function & appearance. OEM Ref.# 306-23124-60-00 34mm OD. Fits: XS2 (1972) and TX650 (1973)

Fork Tube Set(2) - Replace those Worn/Damaged Fork tubes with our New Tubes & restore your front end to proper function & appearance. Fits: TX650A (1974) and XS650B/C (1975-76) OEM Ref. # 533/371-23124 34mm. OD

Fork Tube Cap O-Rings (Pk/2) for 34mm Forks

Fork Tube Cap O-Ring (Pk/2) for 35mm Forks

Swingarm Needle Bearing Conversion Kit - Kit includes Needle Bearings & Hardened shaft. Made in Japan.