Fork Seal Spring Clips (Pk/2) - These clips fit into the groove above the fork seals in the lower fork legs.

Fork Seal Dust Covers (Pk/2) 35mm Fork Tubes

Swingarm Pivot Bolt (Shaft) - Bolt with full size thread (replaces undercut original). Check your original for cracks at the threads.

Bushing (Swingarm Bolt Tube). OEM Ref.# 341-22184-00. Tube is a slip fit through bronze bushings. Replace if original is galled or will not fit through new bronze bushings.

Fork Brace - Stiffens front end, improves handling. Precision Steel construction, Chrome plated finish. Fits over fender.

Front Fork Damper Valves (Pr/2) Tuneable Valves are installed on top of the front fork dampening rods and below the fork springs. The adjustable Damper Valve make rod style fork dampers perform like modern cartridge style forks. Fits: 35mm. forks on 1978-84 XS650's. The Best suspension upgrade modification for the XS650 Note: Damper rod drilling required. Photo install instructions included.

Performance Progressive wound Front Fork Spring Set. Springs improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. Progressive design combats bottoming in harsh conditions by increasing resistance as spring compresses. 24mm Dia. x 484mm long. Fits: 35mm stock forks on XS650 (1977-84)

Fork Gaitors (Set/2) 1972-84 models. (Remove stock dust covers). Give your 650 that "British" look. Provides great fork protection. 1970 models had a lip piece on the lower triple tree on which to clamp the boot, for later models simply insert a piece of split rubber rad hose inside and clamp the upper part of the boot to the fork tube. We suggest a breathing hole be punched on a lower pleat also (face to rear) to allow venting of air.

Cap (Fork Tube Top Cap/Rubber Plug) - Pk/2

Fork Tubes Set/2 - Replace those worn or damaged stock fork tubes with our new fork tubes and restore your front end to proper appearance and function. Replaces OEM #'s: 2F0-23110-00, 1T3-23124-50, 1G3-23124-50. Standard Length 35mm. Fork Tubes fit All 1977-84 650's.

Extended Fork Tube Set/2 (+ 2" over stock length). 35mm. OD Fork Tubes to fit All 1977-84 650's.

Extended Fork Tube Set/2 (+ 4" over stock length). 35mm. OD Fork Tubes to fit All 1977-84 650's .

Extended Fork Tube Set/2 (+ 6" over stock length). 35mm OD Fork Tubes to fit All 1977-84 650's.

Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster. OEM Ref.# 1T3-23111-50-00 Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork tubes Recommended type for 77-84 models using our 27-1088 progressive type fork springs and/or our fork damper valves #27-1086. Note: Use Fork Cap Tool (17mm Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing.

Fork Tube Caps - Set/2 - Stock Aluminum type but with No preload adjuster. Caps Fit: 35mm fork tubes on XS650's 1977-84. Replaces troublesome adjustable US model Cap used on 1978-84 650's Note: Adjustable caps were never used on 650's outside of North America. 22mm Hex top Caution! Fine thread, use care when installing.