CURRENCY ${this.appData['currencyData']['code']}
FREE Continental USA & Canadian Fedex Shipping On orders over $125.00!
Select "Make" and "Year" before "Model"
product image
Clutch Pushrod Bushing
Product Id: 01-2020
Clutch pushrod shaft Bushing Replaces original bushing inside of pushrod housing (transmission shaft) and brings clearances back to original. When stock clearances are too large the pushrod moves to the side and increases tearing stress on the pushrod seal.
${displayCurrency('$ 4.95')}
product image
Clutch Pushrod Oil Seal
Product Id: 01-9019
Clutch Pushrod Oil Seal Made in Japan OEM Ref.# 93102-08094/08118 (SD - 8-25-6) Ars
${displayCurrency('$ 6.95')}
product image
Clutch Adjuster Cover - Chrome
Product Id: 09-6589
Clutch Adjuster Cover - Chrome - Covers adjuster screw in LH crankcase cover. Fits: 1971-84 650's
${displayCurrency('$ 14.95')}
product image
Clutch Friction Plate
Product Id: 39-1133
Clutch Friction Plate Fit: All 650's 1970-84 - Sold Each - Order number of pieces required. 1980-84 models - use 6pc. 1974-79 models - use 7pc.. 1970-73 model clutch friction plates are No longer available but these later types can replace the originals! (6 friction and 5 steel drive plates were originally used). To use these late type friction plates remove the old clutch plate separator O-Rings (discard), and add 1 additional steel drive plate and replace all 6 old type thick friction plates with 7pc. of this new type friction plate.
${displayCurrency('$ 7.95')}
product image
Clutch Spring Screws - Set/6
Product Id: 39-6504
Clutch Spring Screw Set - 12pc. - 6 Socket Head Bolts with Matching Sleeves. Fits: 1970-84 Clutch Hub
${displayCurrency('$ 29.95')}
product image
Needle Bearing with Thrust Washer
Product Id: 39-6505
Needle Bearing with Thrust Washer for Rear of Inner Clutch Hub. Fits: All 650's If your clutch does not seem to release properly or if you have difficulty finding neutral when the engine is hot a worn bearing may be the reason. Our high quality multi-needle bearing assembly is a superior replacement for the original. Note: Bearing Part #39-6505 (OEM Ref.#93341-23504) consists of - 1. the circular bearing race and 2. one thin matching washer. Parts books and manuals show this as 1 part only (not 2 pc). The Clutch must be assembled in Sequence shown above - Bearing with its matching thin washer and then the thick clutch washer (thrust plate).
${displayCurrency('$ 21.95')}
product image
High Performance Clutch Springs - Set/6
Product Id: 39-6506
High Performance Clutch Springs - Set of 6 - Replaces/upgrades sagged original stock springs.
${displayCurrency('$ 22.95')}
product image
Steel Clutch Drive Plate
Product Id: 39-6507
Steel Clutch Drive Plate Fit: All 650's 1970-84 - Sold Each - Order number of pieces required. 1980-84 models - use 5pc. 1974-79 models - use 6 pc. 1970-73 (use 5pc. OR 6pc. if the clutch is upgraded to late type friction plates. See friction plate listings for conversion info). Oem Ref.# 341-16325-01
${displayCurrency('$ 7.95')}
product image
Clutch Spring Screw
Product Id: 39-6508
Clutch Spring Screw - Sold Each. 6 Pieces used per engine. Order what you need. Fits: All 1970-84 XS/TX650's
${displayCurrency('$ 6.50')}
product image
Clutch Pushrod Bearing
Product Id: 39-6509
Clutch Pushrod Bearing, 2 used in each 76-84 engine, (only 1 pc. required if long early 70-75 type clutch pushrod is used). Fits: 1970-84 XS/TX650's.
${displayCurrency('$ 1.50')}
product image
Clutch Pushrod - Short Outer Rod
Product Id: 39-6510
Clutch Pushrod (Short Outer Rod). Stock part for 1976-84 650's
${displayCurrency('$ 9.95')}
product image
Clutch Pushrod - Long One Piece Type
Product Id: 39-6511
Clutch Pushrod (Long One-Piece Rod). Replaces both inner and outer pushrod and outer ball bearing used on 76-84's. Provides more stable action and allows less wear of clutch pushrod seal (Note photo not to scale). Fits: 1970-84 650's. Stock original type for 1970-75 models.
${displayCurrency('$ 19.95')}
product image
Clutch Hub Lock Tab
Product Id: 39-6512
Clutch Hub Lock Tab, Oem Ref.# 90215-19139. Fits: 1980-84 XS650's
${displayCurrency('$ 4.50')}
product image
Clutch Hub Spring Washer
Product Id: 39-6513
Spring Washer for Clutch Hub Nut, Replaces OEM # 214-16119-00. Fits: 1974-79 650's
${displayCurrency('$ 4.50')}
product image
Clutch Hub Nut
Product Id: 39-6514
Clutch Hub Nut, Oem Ref.# 90170-18221/18089, 156-16174-00. Fits: All 650's 1970-84
${displayCurrency('$ 4.50')}
One of the largest vintage XS650
parts warehouses in the world!
All Rights Reserved.