CURRENCY ${this.appData['currencyData']['code']}
FREE Continental USA & Canadian Fedex Shipping On orders over $125.00!
Loading…
Select "Make" and "Year" before "Model"
product image
Clutch Pushrod Bushing
Product Id: 01-2020
Clutch pushrod shaft Bushing Replaces original bushing inside of pushrod housing (transmission shaft) and brings clearances back to original. When stock clearances are too large the pushrod moves to the side and increases tearing stress on the pushrod seal.
${displayCurrency('$ 4.95')}
product image
Clutch Pushrod Oil Seal
Product Id: 01-9019
Clutch Pushrod Oil Seal Made in Japan OEM Ref.# 93102-08094/08118 (SD - 8-25-6) Ars
${displayCurrency('$ 6.95')}
product image
Cable Adjuster - 8 x 23mm
Product Id: 08-0067
Cable Adjuster - 8 x 23mm. - Gold Anodized Fits: All 650 Clutch Cables
${displayCurrency('$ 2.95')}
product image
Clutch Lever - Chrome
Product Id: 08-0131
Clutch Lever - (Chrome plated version of 08-0028) Fits: XS650 SE/F/2F/SF/SG/SH/SK/SL 1978-84 and XS650S J/K Heritage Specials.
${displayCurrency('$ 12.95')}
product image
Lever Bracket - Clutch Side
Product Id: 09-6580
Lever Bracket - Clutch Side, Late Model 650 Yamaha type with Safe-T switch hole and threaded mirror hole. Includes adjuster and lever bolt. OEM Ref.# 4KO/3Y6-82911-00 If you require a lever for this bracket, please purchase our 08-0028 lever.
${displayCurrency('$ 11.95')}
product image
Lever Bracket - Clutch Side
Product Id: 09-6581
Lever Bracket - Clutch Side, Has threaded mirror hole and includes adjuster and lever bolt. (No safe T switch hole). OEM Ref.# 498/341-82911 Fits: Most 1974-80 models If you require a lever for this bracket, please purchase our 08-0014 lever.
${displayCurrency('$ 11.95')}
product image
Clutch Lever Bracket - 2 Piece
Product Id: 09-6583
2 pc. Lever Bracket - Clutch side - With Safe-T switch hole. Much stronger and can be changed without removing grip. Fits: Most 1981-84 650's If you require a lever for this bracket, please purchase our 08-0028 lever.
${displayCurrency('$ 14.95')}
product image
Clutch Lever Bracket - 2 Piece
Product Id: 09-6584
2 pc. Lever Bracket - Clutch side - No Safe-T switch hole. Fits: most 1972-84 650's If you require a lever for this bracket, please purchase our 08-0028 lever.
${displayCurrency('$ 17.95')}
product image
Clutch Adjuster Cover - Chrome
Product Id: 09-6589
Clutch Adjuster Cover - Chrome - Covers adjuster screw in LH crankcase cover. Fits: 1971-84 650's
${displayCurrency('$ 10.95')}
product image
Clutch Friction Plate
Product Id: 39-1133
Clutch Friction Plate Fit: All 650's 1970-84 - Sold Each - Order number of pieces required. 1980-84 models - use 6pc. 1974-79 models - use 7pc.. 1970-73 model clutch friction plates are No longer available but these later types can replace the originals! (6 friction and 5 steel drive plates were originally used). To use these late type friction plates remove the old clutch plate separator O-Rings (discard), and add 1 additional steel drive plate and replace all 6 old type thick friction plates with 7pc. of this new type friction plate.
${displayCurrency('$ 7.95')}
product image
Clutch Spring Screws - Set/6
Product Id: 39-6504
Clutch Spring Screw Set - 12pc. - 6 Socket Head Bolts with Matching Sleeves. Fits: 1970-84 Clutch Hub
${displayCurrency('$ 29.95')}
product image
Needle Bearing with Thrust Washer
Product Id: 39-6505
Needle Bearing with Thrust Washer for Rear of Inner Clutch Hub. Fits: All 650's If your clutch does not seem to release properly or if you have difficulty finding neutral when the engine is hot a worn bearing may be the reason. Our high quality multi-needle bearing assembly is a superior replacement for the original. Note: Bearing Part #39-6505 (OEM Ref.#93341-23504) consists of - 1. the circular bearing race and 2. one thin matching washer. Parts books and manuals show this as 1 part only (not 2 pc). The Clutch must be assembled in Sequence shown above - Bearing with its matching thin washer and then the thick clutch washer (thrust plate).
${displayCurrency('$ 21.95')}
product image
High Performance Clutch Springs - Set/6
Product Id: 39-6506
High Performance Clutch Springs - Set of 6 - Replaces/upgrades sagged original stock springs.
${displayCurrency('$ 22.95')}
product image
Steel Clutch Drive Plate
Product Id: 39-6507
Steel Clutch Drive Plate Fit: All 650's 1970-84 - Sold Each - Order number of pieces required. 1980-84 models - use 5pc. 1974-79 models - use 6 pc. 1970-73 (use 5pc. OR 6pc. if the clutch is upgraded to late type friction plates. See friction plate listings for conversion info). Oem Ref.# 341-16325-01
${displayCurrency('$ 7.95')}
product image
Clutch Spring Screw
Product Id: 39-6508
Clutch Spring Screw - Sold Each. 6 Pieces used per engine. Order what you need. Fits: All 1970-84 XS/TX650's
${displayCurrency('$ 6.50')}
One of the largest vintage XS650
parts warehouses in the world!
©Copyright2020
XS650 DIRECT
All Rights Reserved.