CURRENCY ${this.appData['currencyData']['code']}
FREE Continental USA & Canadian Fedex Shipping On orders over $125.00!
Loading…
Select "Make" and "Year" before "Model"
product image
Neutral Switch Rubber Cap
Product Id: 12-0035
Neutral Switch Rubber Cap. (Neutral Wire Runs from Alternator Loom). Fits: All 650's
${displayCurrency('$ 3.50')}
product image
Left Hand Crankcase Cover Gasket (Alternator)
Product Id: 18-0869
Left Hand Crankcase Cover Gasket. OEM Ref.# 306-15461-00. Fits: 1972-84 650's.
${displayCurrency('$ 10.95')}
product image
Alternator Housing Mount Screws
Product Id: 24-1197
Alternator Housing Mount Screws - Special 6mm (Pk/2). Screws to mount alternator stator housing to engine. Fits: All 650's
${displayCurrency('$ 2.95')}
product image
Starter Motor Brush Set
Product Id: 24-2064
Starter Motor Brush Set (2pc) - Complete Set to Replace Worn out Original Brushes. Fits: 1972-84 XS/TX650's
${displayCurrency('$ 13.95')}
product image
Rectifier Only
Product Id: 24-2085
Rectifier - Solid State Replacement for Original Separate Factory Unit. Direct plug in to stock harness. Fits: 1970-79 650's. Note: wiring in connector plug must be rearranged as shown.
${displayCurrency('$ 69.95')}
product image
Rectifier/Regulator
Product Id: 24-2087
Solid State Rectifier/Regulator, Made in Japan by original supplier. Direct plug in replacement for 1980-84. Not for use on earlier models. Fits: 1980-84 XS650
${displayCurrency('$ 129.95')}
product image
Solid State Rectifier/Regulator
Product Id: 24-2089
Solid State Rectifier Regulator - Comes with Connector Block/Terminal Kits to Wire in Direct to Original Wiring Harness. Replaces Original individual units used on 1970-79 650's. Note: This Rectifier/Regulator is sold only for use with stock 1970-79 wire harnesses. If you are purchasing it for use on a chopper or custom, please note that we can't accept returns for any reason due to the possibility of it being incorrectly installed. Also note this rectifier/regulator does not mount in the original spot.
${displayCurrency('$ 119.95')}
product image
Alternator Rotor Nut & Washer Set
Product Id: 24-2647
Alternator Rotor Nut and Lock Washer Set.
${displayCurrency('$ 3.95')}
product image
Alternator Brush Set/2
Product Id: 24-2650
Alternator Brush Set - Complete set as shown. Replace brushes if carbon brush is 7mm (0.276") or less. Fits: 1970-79 650's Note: To install pull brush assembly around to opposite side of metal bracket its soldered to and then insert into holder.
${displayCurrency('$ 17.95')}
product image
Alternator Brush Set/2
Product Id: 24-2651
Alternator Brush Set - Complete set as shown. Replace brushes if carbon brush is 7mm (0.276") or less. Fits: 1980-84 XS650 Note: To install pull brush assembly around to opposite side of metal bracket its soldered to and then insert into holder.
${displayCurrency('$ 17.95')}
product image
Alternator Rotor
Product Id: 24-2652
New Alternator Rotor, (For TCI Ignition or Points Models). Not a rewind - No core required or accepted - These are New production! Fits: 1970-84 XS/TX650's
${displayCurrency('$ 169.95')}
product image
Alternator Stator
Product Id: 24-2656
Alternator Stator Assembly for Factory Tci Ignition Type Models. Complete New assembly includes New Stator Housing, Stator assembly with wire harness, New Brushes set (24-2651) and Brush holder Guard (24-7084). You can use your existing Alternator Brush Holder, set does not include it. Fits: XS650 1980-84 North American models. Only your original 80-84 TCi trigger needs to be installed.
${displayCurrency('$ 234.95')}
product image
Alternator Stator
Product Id: 24-2657
Alternator Stator Assembly for contact Points Type Models. Fits: 1970-79 North American models (1970-84 Euro points models). Note: No core required or accepted. Ready to install & run!
${displayCurrency('$ 234.95')}
product image
Starter Block-Off Kit
Product Id: 24-6520
Starter Block-Off Kit - Kit is used to block off starter motor hole when starter is removed and bike is to be started with kick starter only. Fits: 1972-84 650's
${displayCurrency('$ 21.95')}
product image
Starter Gear Repair Kit
Product Id: 24-6522
Starter Gear Repair Kit - If your starter kicks out when engaged or makes a rattling sound & will not engage, it is usually the gear that engages with the one on the crank has worn its teeth out (problem is actually not in the starter motor but in the drive train system to the crankshaft, like an Auto bendix drive). This repair kit is the solution! Kit contains: 1pc. 447-15516-00 Gear 4 (Starter gear), 1pc. 90468-29062 Clip - (Spring clip for starter gear), 1pc 90501-15409 Spring, compression - (starter gear spring). This gear assembly is located behind the leading edge of the clutch hub and is easy to change (Clutch cover & clutch hub assembly removal necessary). Fits: All 650's 1972-84
${displayCurrency('$ 49.95')}
One of the largest vintage XS650
parts warehouses in the world!
©Copyright2020
XS650 DIRECT
All Rights Reserved.