CURRENCY ${this.appData['currencyData']['code']}
FREE Continental USA & Canadian Fedex Shipping On orders over $125.00!
Loading…
Select "Make" and "Year" before "Model"
product image
Cylinder Head Sealing Washer
Product Id: 01-0650
Cylinder Head Sealing Washer Steel Head washers with internal seal. Used under 4 outer cylinder head crown nuts. Note: Not included in gasket sets. Made In Japan. Sold each. OEM Ref.# 90210-10004
${displayCurrency('$ 3.95')}
product image
Brass Cylinder Head Washer
Product Id: 01-0651
Brass Cylinder Head Washer Can be used as a substitute for stock cylinder head sealing washers (#01-0650). Used on four outer cylinder head studs. 22mm. OD x 10.5mm. ID x 4mm. thick Note: All Cylinder head fasteners should be re torqued on newly assembled engines after they have been run at full normal operating temperature.
${displayCurrency('$ 3.50')}
product image
Athena Overhaul Gasket Set
Product Id: 18-0652
Overhaul Gasket Set - Sets made by Athena of Italy the European original equipment supplier to Yamaha, Honda, Kawasaki, Suzuki and all major Italian bike makers. Top Quality ISO-9000 approved. Premium Gasket Kit. Athena sets contain more pieces than any other brand. Contains: 18-0672 x 1, 18-0673 x 3, 18-0675 (1pr.),18-0676 x1, 18-0855 x 1, 18-0856 x1, 18-0857 x 1, 18-0858 x1, 18-0860 x1, 18-0862 x1, 18-0863 x2, 18-0864 x1, 18-0865 (1pr.), 18-0674 x1, Valve Stem Seals 01-0115 x 4 and (18-0851 Base Gasket - Do not use gasket cement on this special Gasket). Fits: 1970-71 XS1/XS1b 650's Note: Gasket Sets do NOT contain copper washers, engine oil seals, cylinder head sealing washers, tach drive or cam chain tensioner o-rings/gaskets. These are available separate.
${displayCurrency('$ 114.95')}
product image
Tappet Cover O-Ring
Product Id: 18-0671
Tappet Cover O-Ring - Made in Japan by original supplier (Ars). Sold Each. Fibre gaskets can be used on all 650's, these O-Rings can be used only on engines with the O-ring groove in the tappet cover cap.
${displayCurrency('$ 4.25')}
product image
Tappet Cover Gasket
Product Id: 18-0672
Tappet Cover Gasket (4 Hole) - One piece used on each engine. OEM Ref.#306-11198-00. Fits: All model XS650's from 1972-84 Note: Gasket can be used in place of O-Rings used on some later models.
${displayCurrency('$ 4.95')}
product image
Tappet Cover Gasket
Product Id: 18-0673
Tappet Cover Gasket (3 Hole), OEM Ref.# 256-11196-01. Three pieces used on each 1972-84 engine or 4 pieces on all 1970-71 engines. Note: Gasket can be used in place of O-Rings used on some later models.
${displayCurrency('$ 4.95')}
product image
Left Hand Crankcase Cover Gasket
Product Id: 18-0674
Left Hand Crankcase Cover Gasket. OEM Ref.# 256-15451-00. Fits: 1970-71 XS1/XS1b Only
${displayCurrency('$ 11.95')}
product image
Headpipe Exhaust Gaskets - Pack 2
Product Id: 18-0675
Headpipe Exhaust Gaskets (Pk./2) - Original Yamaha Type. OEM Ref.# 256/3GD-14613-00, 90430-38054. Fits: All 650's 1970-84
${displayCurrency('$ 4.50')}
product image
Cylinder Head Gasket
Product Id: 18-0676
Gasket - Cylinder Head - (77.5mm), OEM# 256-11181-01. Fits: XS1/XS1B 1970-71 Only!
${displayCurrency('$ 44.95')}
product image
Cam Chain Adjuster Cover Gasket
Product Id: 18-0677
Cam Chain Adjuster Cover (Early) Gasket. OEM Ref.# 256-12214-00. Fits: Type A & B Tensioners as used on XS1/XS1b/XS2/TX650 (1970-73) 650's
${displayCurrency('$ 3.95')}
product image
Big Bore Cylinder Base Gasket
Product Id: 18-0749
Premium Base Gasket for Big Bore 750cc Cylinders (85mm OD sleeve size). Stock type stud holes (dowel pins are used). Chemically treated gasket material makes improved seal. Fits: Our #05-0750 Big Bore Kit. Note: No gasket cement to be used on this material.
${displayCurrency('$ 18.95')}
product image
Big Bore Cylinder Head Gasket
Product Id: 18-0750
Big Bore Cylinder Head Gasket (750cc. - 82mm). Superior Quality by Athena. Fits: Our XS Performance #05-0750 Big Bore Kits for 1974-84 447 type engines.
${displayCurrency('$ 49.95')}
product image
Cylinder Base Gasket - Stock Bore
Product Id: 18-0851
Base Gasket for Stock Bore (650cc) Cylinders. Stock type stud holes (dowel pins are used). Special chemically treated gasket material makes improved seal. (no gasket cement to be used on this material). Fits: XS/TX 650's 1972-84 Note: No gasket cement to be used on this material.
${displayCurrency('$ 16.95')}
product image
Cylinder Head Gasket
Product Id: 18-0852
Gasket - Cylinder Head. (77.0mm), OEM Ref.# 306-11181-00. Fits: 1972-84 650's
${displayCurrency('$ 32.95')}
product image
Big Bore Head Gasket
Product Id: 18-0853
Big Bore (87mm) Cylinder Head Gasket for extra large cylinders (approx. 860cc). No dowel pins are used on these special large cylinders. 1972-84 type pattern. 10mm stud holes. Special high quality gasket material.
${displayCurrency('$ 59.95')}
One of the largest vintage XS650
parts warehouses in the world!
©Copyright2020
XS650 DIRECT
All Rights Reserved.