$
FREE Continental USA & Canadian Fedex
Shipping on orders over $125.00!
Loading…
-
Universal Fit
- Accessories +
- Air & Fuel +
- Brakes +
- Carburetor +
- Clutch +
- Decals
- Drive +
- Electrical +
- Engine +
- Exhaust +
- Frame & Controls +
- Handlebars & Grips +
- Suspension +
- Tachometer & Speedometer +
- Tools +
- Wheels +
Spark Plug Cap - LB05EP
Product Id: 23-3117
NGK Resistor Spark Plug Cap (5K Ohms). This 5k cap IS required when
fitting Champion spark plugs (with Solid terminal end) to Boyer and
Factory electronic ignitions. Fits to spark plug with threaded on or
solid terminal end only.
${displayCurrency('$ 3.95')}
Alternator Housing Mount Screws
Product Id: 24-1197
Alternator Housing Mount Screws - Special 6mm (Pk/2).
Screws to mount alternator stator housing to engine.
Fits: All 650's
${displayCurrency('$ 2.95')}
Email Me When Available
Bar Switch Screws - Clutch Side
Product Id: 24-2055
Black Switch Housing Screws (Pk/2) for Clutch Side Handlebar Switch.
Holds Switch Halves Together.
Fits: 1972-84 650's
NOTE: These are replacement screws normally included with switch #24-2058
${displayCurrency('$ 1.95')}
Bar Switch Screws - Brake Side
Product Id: 24-2056
Black Switch Housing Screws (Pk/2) for Brake (Throttle) Side Handlebar Switch.
Holds Switch Halves Together.
Fits: 1972-84 650's
NOTE: These are replacement screws normally included with switch #24-2059
& #24-2060
${displayCurrency('$ 2.25')}
Bar Switch - Clutch Side
Product Id: 24-2058
Bar Switch Assembly - Clutch (LH) Side - Black
OEM Ref. # 1T3-83973-00
Fits: 1977-84 North American Model XS650's.
Note: Switch has No choke cable lever mount as used on
some 1983-84 models.
${displayCurrency('$ 54.95')}
Bar Switch - Brake Side
Product Id: 24-2059
Bar Switch Assembly - Brake/Throttle (RH) Side - Black
OEM Ref. # 584-83963-00-00
Fits: 1976-78 North American Models and 1976-84 European models.
${displayCurrency('$ 54.95')}
Bar Switch - Clutch Side
Product Id: 24-2061
Bar Switch Assembly - Clutch (LH) Side - Chromed
OEM Ref. # 1T3-83973-00
Fits: 1977-84 North American Model XS650's.
Note: Switch has No choke cable lever mount as used on
some 1983-84 models.
${displayCurrency('$ 74.95')}
Bar Switch - Brake Side
Product Id: 24-2062
Bar Switch Assembly - Brake/Throttle (RH) Side - Chrome Plated
OEM Ref. # 584-83963-00-00
Fits: 1976-78 North American Models and 1976-84 European models.
${displayCurrency('$ 59.95')}
Bar Switch - Brake Side
Product Id: 24-2063
Bar Switch Assembly - Brake/Throttle (RH) Side - Chrome Plated
OEM Ref. # 2L0-83975-00-98
Fits: 1979-84 North American Model XS650's.
${displayCurrency('$ 59.95')}
Starter Motor Brush Set
Product Id: 24-2064
Starter Motor Brush Set (2pc) - Complete Set to Replace Worn out Original Brushes.
Fits: 1972-84 XS/TX650's
${displayCurrency('$ 13.95')}
Handlebar Switch Housing Screws - Brake Side
Product Id: 24-2066
Chrome Switch Housing Screws (Pk/2) for Brake (Throttle) Side Handlebar Switch.
Holds Switch Halves Together.
Fits: 1972-84 650's
NOTE: These are replacement screws normally included with switch #24-2062
& #24-2063
${displayCurrency('$ 1.95')}
Handlebar Switch Housing Screws - Clutch Side
Product Id: 24-2067
Chrome Switch Housing Screws (Pk/2) for Clutch Side Handlebar Switch.
Holds Switch Halves Together.
Fits: 1972-84 650's
NOTE: These are replacement screws normally included with switch #24-2062
& #24-2063
${displayCurrency('$ 1.95')}
Email Me When Available
Rectifier Only
Product Id: 24-2085
Rectifier - Solid State Replacement for Original Separate Factory Unit.
Direct plug in to stock harness.
Fits: 1970-79 650's.
Note: wiring in connector plug must be rearranged as shown.
${displayCurrency('$ 69.95')}
Email Me When Available
Rectifier/Regulator
Product Id: 24-2087
Solid State Rectifier/Regulator, Made in Japan by original supplier. Direct
plug in replacement for 1980-84. Not for use on earlier models.
Fits: 1980-84 XS650
${displayCurrency('$ 129.95')}
Email Me When Available
Solid State Rectifier/Regulator
Product Id: 24-2089
Solid State Rectifier Regulator - Comes with Connector Block/Terminal
Kits to Wire in Direct to Original Wiring Harness.
Replaces Original individual units used on 1970-79 650's.
Note: This Rectifier/Regulator is sold only for use with stock 1970-79 wire harnesses.
If you are purchasing it for use on a chopper or custom, please note that we can't
accept returns for any reason due to the possibility of it being incorrectly installed.
Also note this rectifier/regulator does not mount in the original spot.
${displayCurrency('$ 119.95')}
Email Me When Available
One of the largest vintage Yamaha XS650
parts warehouses in the world!
© 2024
XS650 DIRECT
All Rights Reserved.
