Clutch Pushrod (Short Outer Rod). Stock part for 1976-84 650's

Clutch Pushrod (Long One-Piece Rod). Replaces both inner and outer pushrod and outer ball bearing used on 76-84's. Provides more stable action and allows less wear of clutch pushrod seal (Note photo not to scale). Fits: 1970-84 650's. Stock original type for 1970-75 models.

Clutch Hub Lock Tab, Oem Ref.# 90215-19139. Fits: 1980-84 XS650's

Spring Washer for Clutch Hub Nut, Replaces OEM # 214-16119-00. Fits: 1974-79 650's

Clutch Hub Nut, Oem Ref.# 90170-18221/18089, 156-16174-00. Fits: All 650's 1970-84

Clutch Hub Cush Spring Repair Kit. Replace broken clutch hub cush springs with this kit. Includes 6 Cush springs and special bolts that replace hub rivets. Fits: 1970-84 650's

Clutch Push Screw & Housing Assembly Kit - Kit countains: Push Screw Housing with mount screws, Push Screw with Adjuster and locknut, Return spring and anchor pin, Cable Hook with hinge pin, dust seal. - Sold as a Kit Only . Push screw has Long type actuator arm that gives maximum leverage and provides lightest clutch lever pull.

High Performance Clutch Friction Plate Fit: All 650's 1970-84 - Sold Each - Order number of pieces required. 1980-84 models - use 6pc. 1974-79 models - use 7pc. 1970-73 model clutch friction plates are No longer available but these later types can replace the originals! (6 friction and 5 steel drive plates were originally used). To use these late type friction plates remove the old clutch plate separator O-Rings (discard), and add 1 additional steel drive plate and replace all 6 old type thick friction plates with 7pc. of this new type friction plate. 1982-1983 XS400 - use 5 pc 1978-1981 XS1100 - use 8 pc.

Spring Steel retaining wire for Inner Clutch Hub (Clutch Boss). This wire holds the first metal clutch plate (special type) in place on the inner clutch hub and is easily damaged if removed from its installed position.

Clutch Cable (Black) - Made in Japan Fits: XS650 (1978-84) "Specials" with stock pullback type high bars.

Clutch Cable (Grey) - OEM Ref.# 256-26335-02 - Made in Japan Fits: 1970 Yamaha XS650 XS1 1971 Yamaha XS650 XS1B 1972 Yamaha XS650 XS2 1973 Yamaha TX650 TX650 1974 Yamaha TX650 TX650A 1975 Yamaha XS650 XS650B 1976 Yamaha XS650 XS650C 1977 Yamaha XS650 XS650D 1978 Yamaha XS650 XS650E 1979 Yamaha XS650 XS650F

This 51" Cable is Shorter then Stock - Clutch Cable (Black) - Made in Japan. This Cable is 4" shorter then the stock 55" cables. To be used with bars that are lower then originals such as drag bars. Fits: Yamaha XS/TX650 (1974-84) - with shorter bars.

Clutch Lever Dust Cover - OEM Ref. # 1E6-26372-00

Clutch Cable Adjuster Dust Cover - Rubber boot/cover keeps dirt from contaminating cable adjuster threads. Replaces original OEM cover. Fits: 78-84 XS650's and hundreds of other Yamaha's.

Extended Clutch Cable - (Black) Clutch - Same as Clutch cable #51-3204 but + 350mm. (13.75") in length. Total outer cable casing length including metal bend that fits to engine is approx 66.5" (1690mm). Fits: Custom High Bar applications for TX/XS650's (1974-84). Great for many custom applications for many bikes. Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables.